|
|
|
|
|
|
|
|
|
BUNGEE BUTTON # 224 & #225 FOR THE HAMMER
|
|
You need these parts to install the Luggage Rack for the HAMMER.
Save your fender with these CNC machined billet aluminum, hard chromed Bungee Buttons. The Slot is perfectly sized for a bungee chord hook. Comes in pairs, each item includes 2 CNC bungee buttons, 2 bolts with chromed or mirror-polished heads, and 2 chrome caps for the allen bolts for a 100% mirror finish clean look.
Part # 224 Fender Rail Front Hole.
Part #225 Fender Rail Rear Hole.
|
$79.90
|
|
|
|
|
BUNGEE BUTTON-2 SETS # 311 FOR THE JACKPOT
|
|
You need these parts to install the Luggage Rack for the JACKPOT.
Save your fender with these CNC machined billet aluminum, hard chromed Bungee Buttons. The Slot is perfectly sized for a bungee chord hook. Comes in pairs, each item includes 2 CNC bungee buttons, 2 bolts with chromed or mirror-polished heads, and 2 chrome caps for the allen bolts for a 100% mirror finish clean look.
2 SETS OF PART # 311 Fender Rail Front and Rear Hole.
|
$79.90
|
|
|
|
BACK REST FOR SOLO RIDER AND PASSENGER
|
Backrest for solo Rider and passenger, Victory. Fits the Luggage Racks featured above.
|
$185.95
|
|
|
|
|
|
|
|
BELT COVER FOR VICTORY HAMMER & JACKPOT 2004-2007 MODELS
|
Chrome Pulley Cover & Lowering Kit.
Fit's ONLY the Victory Hammer & Jackpot 2004-2007 models.
Due to the Belt hitting the stock pulley cover when the bike is lowered on the 2007 and older Victory Jackpot and Hammer models, this Custom Chrome Pulley cover allows the bike to be lowered with no interference with the drive belt.
This kit lowers the bike 1-1/2 inches in the rear and gives your scoot that custom mean low look everyone loves to look at.
|
$329.95
|
|
|
|
|
|
Victory Linkage-"Victory Motorcycle" Plus 2"
|
This Victory Motorcycle beautiful 2 Plus 2" Shifter Linkage, a beautiful, water jet cut shifter linkages for your Victory.
These linkages will dress up your bike and give it a custom look.
Add these personalized custom shifter linkages for a unique finished look!
*NOTE: May need to cut new threads on Shifter Linkage.
|
$129.95
|
|
|
|
|
|
|
|
AIR RIDE SYSTEM FOR KINGPIN, VEGAS, 8BALL & HAMMER
|
AIR RIDE SYSTEM
For the Kingpin, Vegas, 8Ball and Hammer
With this system bleed feed Air Ride System for your Victory. This is THE air ride system you want for your Victory. Allows you to adjust ride height while riding, either solo or two up. Fully slam your bike while parked, or while riding. This system has excellent ride quality without excessive bouncing due to it's bleed feed air damping characteristics!
This system has two independent pressure adjustments setting the pressure on both sides of the piston gives you the ultimate control over ride quality. This system comes pre-wired making installation a snap. Comes with Air compressor, shock, all wires, air lines, and hardware needed to complete the installation.
|
$1,185.00
|
|
|
|
EMERGENCY CLUTCH CABLE REPAIR KIT
|
Emergency clutch cable repair kit specifically for Polaris Victory Motorcycles, 1999 and newer. This easy to install Victory motorcycle clutch cable repair kit includes everything you need, is inexpensive and fits in your saddlebag so you are never caught unprepared.
|
$39.00
|
|
|
|
EMERGENCY CLUTCH CABLE REPAIR KIT
|
Emergency clutch cable repair kit specifically for Polaris Victory Motorcycles, 1999 and newer. This clutch cable is 8 inches longer than the standard clutch cable. It will fit high rise handlebars up to 8 inch and can also be trimmed if you do not need that extra length. This easy to install Victory motorcycle clutch cable repair kit includes everything you need, is inexpensive and fits in your saddlebag.
|
$45.00
|
|
|
|
CLUTCH CABLE-For Cross Roads/Cross Country
|
This emergency clutch cable repair kit is specifically designed for Victory Cross Roads and Cross Country. This cable will also work on other 2010 models, but it is longer than it needs to be for some and can be trimmed off if necessary after it is installed.
This easy to install Victory motorcycle clutch cable repair kit includes: cable with barrel, screw-type barrel, 2 grease packets, wet wipe and easy to understand.
instructions Tools needed: 8mm and 10mm wrenches or combination wrench. For peace of mind always carry one in your saddlebag.
|
$45.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRO STREET KIT-BOLT ON VICTORY-HAMMER/KINGPIN
|
Fits the Victory HAMMER & KINGPIN
This BOLT ON kit will rake your front forks to 45 degrees AND maintain correct trail numbers. The engineering geometry of this setup results in the front end being LIGHTER than stock at both low speed and high speed. High speed stability is excellent.
These parts are all high quality billet 6061 T6 aluminum (and steel where required) CAD designed and CNC machined to exacting specifications. The chrome is show quality, period. A new steel steering shaft that is stronger than your stock shaft is included. The kit also includes brand new upgraded steering bearings.
This kit TOTALLY transforms the look of your bike with no welding required. Installation time is 8 hours in your garage. All hardware necessary to rake and extend your forks is included.
The kit includes a totally awesome billet warning light mount setup, if you are running the digital instrument cluster, and not the stock warning lights, you will also need Item 351 blank cover plate (just let us know when you order and we will swap the instrument mount at no charge).
Additional items that are required for some bikes, extended brake line or lines for the front brake and the extended Throttle, Clutch and Choke cables that are required when using the Ness Fly Bars, Ram Bars or any set up that pulls the bars back more than 2 inches.
Items needed to complete your installation (Sold Here):
Lower Brake Line Kit Item # SPE-1170
Upper Brake Line Kit Item # SPE-1172
Riser for Drag Bars Item # 386
For Ness Fly Bars, you will need Item # 386, 2 inch riser. And for Hammer V Bars, you can use our Item # 386, 2 inch riser to get extra pull back.(Sold Separately).
IItem # SPE-1170 Lower Ex. Brake line kit & Item # SPE-1172 Upper Ex. Brake line kits are required to complete the install for the Hammer our any duel disc brake set up. (Sold Separately).
|
$2,599.95
|
|
|
|
|
|
|
|
|
|
|
|
WINDSHIELD MOUNT KIT-VICTORY
|
Item # 408. Windshield Mount Kit for the Victory. Fits the Pro Street kit, 5 & 7 degree Trike kits only.
|
$149.95
|
|
|
|
RISER FOR DRAG BARS: VICTORY KMPS
|
Item # 386 - Riser for Drag Bars: Victory KMPS. Use the simple and clean riser on your Ness drag bars when you install the KMPS rake kit. These risers allow the bars to clear the tank with the additional rake angle of the top triple tree.
Item # 386 comes with 12mm bolts. Some older bars require 10mm bolts
Before ordering you need to check and see if your bars require 10mm bolts.
If so let us know when ordering (In the Customer Text Box at Checkout) so we can supply yor kit with 10mm bolts.
To install Item # 386 you will be required to remove the stock studs from your bars to use the supplied 12MM bolts.
To remove the stock studs you will need to double nut the studs and apply some heat to the stock stud to break the bond of the factory locking compound used on the studs, the studs will unscrew when the locking compound get's a little hot.
Make sure to keep the heat on the stud not the bars.
|
$99.95
|
|
|
|
BILLET SPIKE BOLT CAPS FOR FUEL FILL-SET OF 5
|
Add a finished look with some attitude to your gas cap allen had bolts with these hot new spikes!
Machined from 6061-T6 aircraft billet Aluminum for durability
Hand polished to a brilliant mirror finish for good looks
Install in minutes, no tools required!.
|
$25.00
|
|
|
|
HEEL BLADES
|
Give your feet that extra added comfort while riding. Easily adds another foot position to your floorboards without the bulky always visible Highway Pegs. They support your heel for that extra comfort while riding. They conveniently virtually disappear when not in use. These custom made heel blades are made from a highly polished Stainless Steel and made here in the good ole USA!
DOWNLOAD THE INSTALLATION INSTRUCTIONS BY CLICKING HERE
Features:
*2B Electro-polished Stainless Steel
*Virtually disappears when not in use
*Supports your heel for a more relaxed ride
*Installs in minutes
*Made in the USA
|
$179.99
|
|
|
|
VICTORY GETSMART CRUISE CONTROL
|
Fitment: ALL.'99 to '07 Model Victory Motorcycles, regardless of model. Works with all stock grips and most aftermaket grips as well.
* Installs in just minutes by even the novice mechanic. Easiest cruise to install, no wires, switches, or brackets... just bolt it on and go!
* Applies adjustable friction to maintain a desired throttle setting, while still keeping the grip free to work by hand as necessary.
* Billet 6061 Aluminum body and SS knobs and spring for long life, and a long lasting Delrin friction ring for trouble free operation.
|
$79.95
|
|
|
|
|
|
Item # 481 Stock Victory Bag Mount Kit for Luggage Rack.
|
|
$69.95
|
|
|
|
LOWER BRAKE LINE KIT, VICTORY HAMMER KMPS
|
Lower Brake Line Kit for the Victory Hammer KMPS. #SPE-1170
|
$189.95
|
|
|
|
UPPER BRAKE LINE KIT-VICTORY HAMMER KMPS
|
Item# SPE-1172-Upper Brake Line Kit, for Victory Hammer KMPS.
|
$99.95
|
|
|
|
BULLET LIGHT RED BASE MOUNT (PAIR)
|
These high intensity LED products are designed to give greater visibility and conspicuity to your motorcycle. They are unique, because they have been engineered to function in both high and low intensity brightness for a multitude of applications. Can be used as running lights and Turn Signals; and can also be used a brake lights with our optional Tri-Star module.
Features:
Unique Dual Function Brightness LED's - Can be operated in low or high intensity brightness
Quality Finish -Marine Grade brilliant Mirror Chrome with a super tough poly-carbonate lens.
Dimensions: - 2.25" Diameter - 3.33" Long, Mounts with standard 5/16" - 24 mounting bolt, 36" 3 conductor cable.
Low Power Requirements - 12V DC, 1/4 Amp!
Easy Installation - Base mount version includes bolt and both 1/4" and 1" standoffs to mount to any flat surface. Bolt mount version mounts with 5/16" - 24 bolt (not included). Perfect for under mirror or handle bars also compatible with our fork clamps. Three wire installation Black - Ground, Blue - Running Lights - Violet - High intensity (Turn Signals and/or Brake Lights)
|
$114.95
|
|
|
|
BULLET LIGHT AMBER BOLT MOUNT (Pair)
|
These high intensity LED products are designed to give greater visibility and conspicuity to your motorcycle. They are unique, because they have been engineered to function in both high and low intensity brightness for a multitude of applications. Can be used as running lights and Turn Signals; and can also be used a brake lights with our optional Tri-Star module.
|
$109.95
|
|
|
|
BULLET LIGHT AMBER BASE MOUNT (PAIR)
|
These high intensity LED products are designed to give greater visibility and conspicuity to your motorcycle. They are unique, because they have been engineered to function in both high and low intensity brightness for a multitude of applications. Can be used as running lights and Turn Signals; and can also be used a brake lights with our optional Tri-Star module.
|
$119.95
|
|
|
|
BULLET LIGHT RED BOLT MOUNT (PAIR)
|
These high intensity LED products are designed to give greater visibility and conspicuity to your motorcycle. They are unique, because they have been engineered to function in both high and low intensity brightness for a multitude of applications. Can be used as running lights and Turn Signals; and can also be used a brake lights with our optional Tri-Star module.
|
$104.95
|
|
|
|
|
